H-King MX2 3D EPP 955mm ARF
Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!
It's fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimise flex and twist. The control surfaces are something else - the elevator, rudder and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls 'Snap' and control response is instantaneous. The light - yet rigid - airframe adds up to one great flying 3D 'foamy'. Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!
Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.
This is a great model for general park flying and hardcore 3D. You will be hard pressed to break this model, it will take hard knocks and just keep bouncing back everytime!
Features:
• Tough EPP material, light-weight and crash resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D manoeuvrability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation
Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)
Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7/11x4.7 propeller
4 x 9g servos
Gewicht:
zonder accu 600 g
met 3S Bolt 1800 mAh 765 g
Motor:
PROPDRIVE v2 2836 1000KV Brushless Outrunner Motor
KV: 1000 KV
Max current: 30A
ESC: 30~40A
Cell count: 3s~4s Lipoly
Pole Count: 12
Bolt holes: 16 & 19mm
Bolt thread: M3
Shaft: 3.175mm
Connectors: 3.5mm Bullet
Weight: 82g
Servo's:
4x Turnigyâ„¢ TGY-50090M Analog Servo 20T MG 1.6kg / 0.08sec / 9g
Specs:
Weight: 9g
Size: 23.1mmx12.0mmx25.9mm
Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v)
Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v)
Voltage: 4.8-6.0v
Type: Analog Micro
Gear Train: Metal
Ball Bearing: No
Lead Length: 240mm
Plug: JR/Futaba
Spline Count: 20
ESC:
TURNIGY Plush 30amp Speed Controller w/BEC
Cont Current: 30A
Burst Current: 40A
BEC Mode: Linear
BEC : 5v / 2A
Lipo Cells: 2-4
NiMH : 5-12
Weight: 25g
Size: 45x24x11mm
CG:
volgens opgave 85-90 mm voor L.E. at root ofwel achter de leading edge bij de romp ofwel bij romp vanaf voorzijde vleugel
op internet gelezen dat ie zo makkelijk staartlastig is, daarom CG op 80 mm ingesteld met een Bolt 3S 1800 mAh
Vermogen:
gemeten met 3 S Bolt 1800 mAh 65-130 C en 10 x 4,5 R SF 21 A 250 W bij 12,4 V
Kosten:
bij HobbyKing in totaal vliegklaar zonder accu en zonder ontvanger € 96
H-King MX2 3D EPP 955mm ARF €47.18
PROPDRIVE V2 2836 1000KV Brushless Outrunner Motor incl.adaptor €13.71
Hobbyking Slowfly Propeller 10x4.5 Blue (CW/CCW) (4pcs) €3.59
TURNIGY Plush 30amp Speed Controller W/BEC €12.62
4x Turnigy™ TGY-50090M Analog Servo 20T MG 1.6kg / 0.08sec / 9g €18.36
Uitgevoerd met Eagle Tree flight controller.